Epoxy mortar FIS EB II

The Epoxy mortar for standard applications in concrete.

The fischer injection mortar FIS EB II is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for post-installed rebar connections. It is suitable for fixing heavy loads both indoor and outdoor. The FIS EB II can be installed with the approved system components fischer threaded rods FIS A / RGM or with reinforcement bars. The FIS EB II can be used in dry or wet concrete, as well as in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system under all work site conditions. More information ภาษาไทย Contact us

Product Detail

Advantages
- The injection mortar FIS EB II has ETA assessments for anchorings in cracked concrete and for post-installed rebar connections.
- FIS EB II is the reliable system for fixing heavy loads indoors and outdoors.
- Due to the variable anchoring depths, the epoxy resin mortar is very versatile.
- The long processing time of FIS EB II is particularly suitable for applications in large and deep drillholes.

Applications
- Heavy steel constructions
- Consoles
- Silo installations
- Tall shelving
- Post-installed rebar connections

Building materials

Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked and non-cracked

Functionality

- The epoxy mortar FIS EB II in combination with the threaded rod FIS A and RG M is suitable for pre-positioned and push-through installation.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is injected bubble-free from the drill hole base.
- The mortar bonds the entire surface of the threaded rod with the drill hole wall and seals off the drill hole.
- The threaded rod is set manually by slightly rotating it until it reaches the drill hole base.

- During push-through installation, the annular gap between the threaded rod and the attachment is filled with FIS EB II.